Products

Product List

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for HUNAN QILU INDUSTRIAL CO., LTD., Professional HUNAN QILU INDUSTRIAL CO., LTD., Best-Selling HUNAN QILU INDUSTRIAL CO., LTD., We have been searching ahead to even better cooperation with overseas buyers dependant on mutual benefits. Be sure to really feel totally free to speak to us for additional element! We're going to commit ourselves to giving our esteemed customers along with the most enthusiastically considerate providers for HUNAN QILU INDUSTRIAL CO., LTD., Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

  • AISI P20 P21 718 Forged Annealed Peeled Block Cold Working Die Steel

    Product Description:
    AISI P20 P21 718 Forged Annealed Peeled Block Cold Working Die Steel 1: P20 steel introductionAISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 mold steel plate material is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW. 2: P20 Steel equivalent Country USA German GB/T Standard ASTM A681 DIN EN ISO 4957 GB/T 1299 Grade P20 1.2311 3Cr2Mo  3: P20 steel chemical compositi...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • 4140 Alloy Steel Suppliers China

    Product Description:
    AISI 4140 Hot Rolled Round Bar Alloy Steel 1: EN 1045 steel introductionEN C45 steel is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements. 2: EN 1045 Steel equivalent ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • AISI P20 DIN 1.2311 GB 3Cr2Mo Hot Forged Qt Turned Block Die Steel

    Product Description:
    AISI P20 DIN 1.2311 GB 3Cr2Mo Hot Forged QT Turned Block Die Steel 1: P20 steel introductionAISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 mold steel plate material is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW. 2: P20 Steel equivalent Country USA German GB/T Standard ASTM A681 DIN EN ISO 4957 GB/T 1299 Grade P20 1.2311 3Cr2Mo  3: P20 steel chemical composition...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • AISI 4140 Hot Rolled Round Bar Alloy Steel

    Product Description:
    AISI 4140 Hot Rolled Round Bar Alloy Steel 1: EN C45 steel introductionEN C45 steel is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements. 2: EN C45 Steel equivalent ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • GB 3Cr2Mo SAE P20 W-Nr 1.2311 Forged Qt Milled Flat Die Steel

    Product Description:
    GB 3Cr2Mo SAE P20 W-Nr 1.2311 Forged QT Milled Flat Die Steel 1: P20 steel introductionAISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 mold steel plate material is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW. 2: P20 Steel equivalent Country USA German GB/T Standard ASTM A681 DIN EN ISO 4957 GB/T 1299 Grade P20 1.2311 3Cr2Mo  3: P20 steel chemical composition ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • 16nicrs4 1.5715 Corten Alloy Steel Round Bar Steel En8 En9 Price Per Kg

    Product Description:
    AISI ASTM 1040 EN8 BS 080M40 Non-alloy Engineering Steel 1: EN8 steel introductionEN8 also know as 080M40. Unalloyed medium carbon steel. EN8 is a medium strength steel, good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. AISI 1040.Available as normalized or rolled. EN8 is supplied as round drawned, round hot rolled, hexagon, square, flats and plate.EN8 is usually supplied untreated but can be supplied to order in the normalized or finally heat treated (quenched and tempered to “Q” or “R”properties for limiting ruling sections up to 63mm), which is adequate for a wi...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • AISI S7/T41907 DIN 1.2355/50crmov13-15 Alloy  Forged Rolled Plate Mould Steel

    Product Description:
    AISI S7/T41907 DIN1.2355/50CrMoV13-15 Alloy Forged Rolled Plate Mould Steel 1: AISI S7 steel introduction     AISI S7 tool steel is a shock-resistant air hardening steel. AISI S7 steel has exceptional impact properties plus the highest hardenability of shock resisting grades of tool steel. Steel S7 also possesses good softening resistance at high temperatures which gives it hot work capabilities. Since S7 steel hardens in air, it is also safe and stable in heat treatment.     AISI S7 tools steel has an unusual combination of properties, making it suitable for an extremely wide range of tool and die work – ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • AISI H13 SKD61 1.2344/X40crmov5-1 Forged Rolled Mould Steel Flat Bar

    Product Description:
    AISI H13 SKD61 1.2344/X40CrMoV5-1 Forged Rolled Mould Steel Flat Bar 1: H13 steel introduction AISI H13 is a chromium-molybdenum-vanadium hot work tool steel as per ASTM A681 standard.It has good resistance to abrasion at low and high temperature,good toughness, and good resistance to thermal fatigue cracking (also known as heat checking).H13 provides excellent machinability with constant hardness during production activities,and also has excellent through-hardening properties and very limited distortion during hardening. 2: H13 Steel equivalent Country Japan Germany China USA Standard JIS G4404 EN ISO495...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • GB Cr12 JIS SKD1 DIN 1.2080/X210cr12 AISI D3 Cold Work Tool Steel Bar Blocks

    Product Description:
    GB Cr12 JIS SKD1 DIN 1.2080/X210Cr12 AISI D3 Cold Work Tool Steel Bar Blocks 1: AISI D3 steel introduction AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. Type AISI D3 cold works tool steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 cold ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • Plastic Mould Tool P20+S 1.2312 Steel Round Plate

    Product Description:
    Hot Rolled Steel Plate for Good Machinability 1.2312 P20+S 1: NAK80 steel introductionNAK80 steel is a precipitation or age-hardened mold steel with a uniform through hardness of approximately 40 HRC. It is super clean, Vacuum-Arc Remelted steel with uniform grain structure, uniform hardness, and excellent dimensional stability. NAK80 tool steel is the improved steel grade of NAK55, on mirror surface, EDM surface and toughness. 2: NAK80 Steel equivalent Country USA German Japan Standard ASTM A681 DIN EN ISO 4957 JIS G4404 Grade P21/P20+S 1.2312 NAK80  3: NAK80 steel chemical composition Grade C Si Mn P S Cr Mo NAK80 0.15 0.3 1.5 0...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • Tool Alloy Steel D3 D2 D6 Annealed Rolled Round

    Product Description:
    Tool Alloy Steel D3 D2 D6 Annealed Rolled Round  1: AISI D3 steel introduction AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. Type AISI D3 cold works tool steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 cold work tool steel tend to be b...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now

  • En Grade High Carbon Steel En8 En19 En24 1045, 4140, 4340)

    Product Description:
    En Grade High Carbon Steel En8 En19 En24 1045, 4140, 4340) 1: 4340 steel introductionAISI 4340 steel is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. 4340 alloy steel is generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa. Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has good shock and impact resistance as well as wear and abrasion resistance in the hardened condition. AISI ...
    HUNAN QILU INDUSTRIAL CO., LTD.
    Diamond Member Audited Supplier
    China ISO 9001, ANSI/ESD...more
    Contact Now